Change management

What is end user training?

End user training teaches the people who will work in a system every day to do their own tasks in it. On a rollout it comes near the end of the project, which is why it is the first thing to lose time when the project runs late.

Updated

Change management

Facts checked on 21 November 2026

Short answerEnd user training is role-based training for the people who do the work in a system: the clerk posting invoices, the agent logging cases, the nurse charting medication. It is separate from the training given to administrators, super users and the project team. A sound programme mixes methods, so that people are shown each task, get to practise it, have help beside them at go-live and can look things up afterwards.

Who counts as an end user

An end user is anyone who uses the system to do their job and has no part in building or running it. A new ERP at a manufacturer might have 15 people on the project team, 6 administrators, 30 super users and 900 end users. The 900 are the reason the system exists, and they see it last.

GroupWho they areWhat they learnWhen
End usersPeople who do the daily work in the systemThe 10 to 20 tasks their role performsThe last weeks before go-live
Super users (also called key users, power users or champions)End users chosen from each team to learn early and help colleaguesTheir team's tasks in depth, the common problems, how to coachMonths before go-live
AdministratorsThe IT or systems team that configures the system and sets permissionsConfiguration, security, integrations, usually on vendor coursesDuring the build
Project teamProcess owners, consultants and testersThe whole design, across processesFrom the start of the project
Support deskThe people who answer tickets after go-liveThe common tasks, known issues, where to escalateBefore end users train
Managers and executivesPeople who approve transactions and read reportsApprovals and the handful of reports they will useThe final fortnight

Microsoft's implementation guide for Dynamics 365 draws similar lines. It names system users, trainers, super users, stakeholders, and support desk and administrators as separate training audiences.

End user training methods compared

There are eight methods in common use. Cost and scale below are relative, because prices vary too much by vendor and country for a single figure to mean anything.

MethodCostScaleGood atWeak at
Classroom with an instructorHigh per person: trainer, room, travel and a day away from workAbout a dozen people a session, if the trainer is to see every screenQuestions, judgement calls and physical kit such as scanners and tillsNew starters, people who miss the day, consistency between trainers
Virtual instructor-ledMedium: trainer time without the travelMany sites at once, in groups just as small if people are to do the taskReaching remote teams, and leaving a recording behindSeeing who is stuck or who has stopped following
E-learning coursesHigh to build, low per learner afterwardsThousandsProcess background, policy and the reasons behind a step. Easy to track in an LMS.Doing. Reading about a screen and pressing Next does not train the task.
SimulationsMedium to build per task, low per learnerThousands, with no system access neededRepeating the exact steps safely before accounts exist, and scoring an attemptAnything off the recorded path. They need rebuilding when screens change.
Sandbox or training clientHigh to keep running: environment, realistic data, accounts, refreshesLimited by capacity and by data that gets used upReal system behaviour, exploring, long scenarios that cross teamsOften ready late. No guidance or scoring of its own.
In-app guidanceA licence, plus building and maintaining each walkthroughEveryone on the live systemHelp while working, rare tasks, changes after go-liveIt guides people on real records in the live system, so it is help on the job more than rehearsal. A finished walkthrough does not show that someone can do the task unaided.
Floor-walkersHigh for a short time: people taken off their own jobsOne per team or areaUnblocking people in the first days and spotting patternsThey leave when the support period ends, and their answers are lost unless someone logs them.
Quick reference guidesLowEveryoneRare tasks, reminders, which value goes in which fieldTeaching a task from nothing. They go out of date quietly.

No single method carries a rollout. For an office role a workable mix is a short demo, simulation practice and a scored check before go-live, then floor-walkers and quick reference guides after it. For warehouse or shop-floor roles the classroom earns its cost, because people need the real handheld in their hands.

Two of these methods get confused often. Simulation vs sandbox sets out the difference, and digital adoption platforms covers in-app guidance in detail.

Watch the sandbox data

Microsoft's guide warns against training environments filled with records called "Test 1" and "Test 2". People learn from data that looks like their own customers, suppliers and stock. It also recommends giving training accounts the same access the person will have in production. A trainee logged in as an administrator sees buttons that will not be there on day one.

What materials a programme needs

End user training materials are more than slides. A programme for a mid-sized rollout needs most of this list.

  • A role and task matrix: which role does which task, with headcounts
  • A short process overview per role, showing what happens before and after their step
  • A demo of each trained task, recorded so that it can be replayed
  • Practice exercises with realistic data, in a simulation or a training environment
  • A check for the tasks that matter most, with a pass mark agreed in advance
  • Quick reference guides, one page a task
  • Trainer notes, so that two trainers teach the same steps
  • The schedule, and the message that tells each person when and where
  • One place where all of it lives after go-live

The last item gets forgotten. Microsoft's guide recommends storing training content in one central location, so that a new starter's manager can find it six months on. If you are writing the reference pages yourself, how to create a training manual covers the format. For the planning document that ties the materials to dates and owners, use the software training plan template.

Who owns end user training

On a large project it sits with a training lead inside the change management workstream. On a small one it is whoever volunteered. Either way, the plan should name a person for each of five jobs.

  • The training lead plans the programme, builds or commissions the materials and reports readiness.
  • Process owners confirm that each lesson shows the agreed way of doing the task. Microsoft's guide splits the work the same way: trainers create the content, subject experts review it.
  • Super users deliver sessions and answer questions on the floor.
  • IT provides the training environment, the data and the accounts.
  • Line managers release people for training, which in practice decides whether anyone turns up.

The vendor or implementation partner often trains the project team and the administrators. Do not assume they will train 900 end users on your processes unless the contract says so.

When to run it

Project start

Write the training plan. Microsoft's guide says to develop it at the beginning of the project.

Months before go-live

Train super users and trainers. They test the system and review the materials.

Last three weeks

Train end users, late enough to remember and early enough for catch-up sessions.

First month live

Floor support, then refreshers on the tasks that produce the most tickets.

The pressure comes from both sides. Clarkston Consulting, writing about SAP projects, notes that training too late risks disruption at go-live and training too early means people need refreshers. Because end user training is one of the last tasks on the plan, a late build eats its window first. Ask the steering group to record any cut to training time as a go-live risk, in writing.

For a step-by-step method that fits inside this window, see how to train employees on new software.

End user training in SAP projects

SAP's own method, SAP Activate, has six phases: Discover, Prepare, Explore, Realize, Deploy and Run. End user training belongs to its Solution Adoption workstream and is spread across them. SAP's learning material places the approach to user enablement in Prepare, the training needs in Explore, the training content in Realize, and delivery of user training in Deploy.

The practical point for an SAP training lead is that content gets built during Realize, while the system is still changing. Anything recorded early will need a second pass after the final configuration. On SAP projects hands-on practice often happens in a training client, a separate copy of the system set aside for practice. Simulations are an alternative when that copy is not ready or cannot take 900 people. The buyer guide to practice simulations for SAP S/4HANA goes further into that choice.

End user training in ERP projects

An ERP joins departments together, so one person's slip becomes someone else's problem. If the warehouse does not post a goods receipt, accounts payable cannot match the invoice two days later. That is why ERP training should follow the process from end to end, and show each role the step before and the step after their own. Stoneridge Software, which implements ERP systems, recommends a process impact assessment first: for each process, what changes and for whom.

There are buyer guides for ERP go-lives, Workday and SuccessFactors, Dynamics 365, NetSuite, Oracle Fusion Cloud and hospital record systems such as Epic, under EHR training.

Where Recourse fits

The simulation row, without a training environment

Recourse turns a screen recording of a task into a simulation with three modes: Demo to watch, Practice on a replica of the screen with hints that escalate, and Evaluate, an unaided run scored against a pass mark. The built-in recorder captures a browser tab, a program window or the whole screen, which includes SAP GUI and other desktop programs. It suits the weeks before go-live, when end users have no accounts yet. What it does not do: it does not provide a sandbox or training client, it does not put guidance on the live system, and it is not an LMS. Courses export as SCORM 1.2 only.

Start free

Questions people ask

What is end user training?
It is training for the people who will use a system in their daily work, as opposed to the people who configure or support it. It is organised by role and covers the tasks each role performs, such as posting an invoice or logging a case.
What is the difference between an end user and a super user?
An end user does their own tasks in the system. A super user, also called a key user or power user, is an end user picked from a team to learn the system early, help test it and support colleagues at go-live. Super users need deeper training and need it months sooner.
In which phase does end user training occur?
Near the end. In SAP Activate, delivering user training sits in the Deploy phase, after the content has been developed in Realize. In other methods it falls in the final weeks before go-live. Microsoft's guide for Dynamics 365 places it after development and before user acceptance testing. Planning for it starts at the beginning of the project.
What is SAP end user training?
Training for the people who will run transactions in SAP as part of their job, such as an accounts payable clerk posting invoices in S/4HANA. It is role-based, usually combines demos with hands-on sessions in a training client or simulations, and is delivered shortly before go-live.
What does an end user training plan look like?
One row per role, with the tasks that role will learn, the format, the owner, the dates and how you will check the training worked, plus a week-by-week timeline around go-live. There is a filled-in example in the software training plan template on this site.
What are the main end user training methods?
Classroom sessions, virtual instructor-led sessions, e-learning courses, simulations, hands-on sessions in a sandbox or training client, in-app guidance, floor-walkers and quick reference guides. Most programmes combine several of them.

Sources

Keep reading

Last reviewed 21 November 2026. Recourse publishes these guides for learning, customer education and change teams. Details drawn from public sources can change.