Software simulations

How to turn a screen recording into interactive training

A screen recording of someone doing a task holds almost everything a learner needs: every screen, every click and the expert's own explanation. This page shows how that one recording becomes training people can click through, and how to make a recording that works well.

Updated

Software simulations
Short answerRecord one task from start to finish and talk as you go. A tool then splits the recording into screens, finds each click, reads the buttons and labels, and writes an instruction for each step. From that you get three things: a walkthrough to watch, a practice run with hints, and a scored test. You check and edit the steps before anyone sees them.

Why start from a screen recording?

Most software training starts from something thinner. A written procedure. A deck of screenshots. An hour of an expert's time that you never quite get.

A screen recording holds more in each minute than any of them, because it captures three things at once.

What is in the recordingWhat it tells you
The pictureEvery screen in the task, with the real fields, menus and messages, in the order they appear
The clicksExactly where the expert clicked and what they typed, including the small steps a written guide leaves out
The voiceWhy they did it that way: the rule behind a field, the mistake people usually make, what to do when the screen looks different

It is also the smallest thing to ask an expert for. Writing a procedure takes an afternoon. Doing the task once while talking takes five minutes, and they were going to do the task anyway. We wrote more about this in the best training material was never written down.

What you can do with a recording

Use it asThe learnerWhat you find out
A videoWatchesThat they pressed play
A step by step guide with screenshotsReads, and follows along in the real systemNothing, unless you ask them
A simulationDoes every click in a copy of the screensWho can do the task, and where people go wrong

The first two are useful for looking something up. The third is the one that builds skill, because the learner has to do the task and not just see it. More on that in what is a software simulation?

How a recording becomes a simulation

These are the steps in Recourse. Other tools that work from a recording follow a similar order.

  1. Get the recording inThere are three ways. Record your screen with the recorder built into Recourse, which needs nothing installed: you pick a browser tab, a window or the whole screen, and it can record your microphone too. Record with the Recourse Chrome extension, which works in Chrome and other Chromium browsers such as Edge. It is made for web apps: it pinpoints each click on the page, and lets you blur anything on the page that should not be shown. Or upload a video you already have.
  2. It is split into screensThe recording is cut at each point where the screen changes, so a five minute video becomes a set of still screens in order.
  3. Each click is locatedFor every screen, the place the expert clicked becomes the spot the learner has to click.
  4. Buttons and labels are readThe names on the screen are read, so an instruction can say "Click Submit for Approval" and not "Click here".
  5. Instructions are draftedEach step gets a short instruction in plain words.
  6. You review itOpen the simulation and check each step. Change the wording, or add narration by typing the words to be spoken or by adding audio. Nothing reaches a learner until you are happy with it.
  7. You share itSend a link, place the simulation inside a course, or export it for your LMS.

One recording, three learning experiences

The same set of steps is played back in three ways. Trainers often call them show me, try me, test me.

ModeWhat the learner doesUse it for
DemoWatches a narrated walkthrough of the task, one step at a timeA first look at the whole task
PracticeDoes each step themselves. If they get stuck they get a hint, then a nudge, then the answerBuilding the habit safely
EvaluateDoes the task with no help and is scored against a pass markProof that they are ready

You do not record three times. You record once and choose which modes to give learners.

How to make a recording that works well

  • One task per recording. "Approve a time off request", not "Manager self service". Two to five minutes is about right.
  • Use example data. A made-up supplier, employee or patient. Whatever is on screen in the recording will be on screen for every learner.
  • Rehearse once. Do the task before you record, so the recording has no wrong turns in it.
  • Go at a steady pace. Pause for a moment after each click so the next screen has time to load fully.
  • Say why, not just what. "I choose cost centre 4100 because this is a stock item" is worth more than "now I click here".
  • Keep the window the same size. Do not resize or move it part way through.
  • Close what you do not need. Chat pop-ups, email alerts and other tabs do not belong in training.

Recordings you may already have

Before you ask anyone to record something new, look at what exists.

  • A handover call on Zoom or Teams where someone shared their screen
  • A recorded user acceptance testing session from the project
  • A Loom from the product team showing a new feature
  • A vendor's recorded training session for your configuration
  • A support agent's screen share with a customer (check what personal data is visible first)

The quality will be rougher than a recording made on purpose, with pauses and side conversations. It can still save the expert's time, which is usually the thing you have least of.

What this does not give you

It helps to be clear about the limits.

  • It is not a sandbox. The learner follows the task that was recorded. They cannot wander off into other parts of the system. See simulation vs sandbox.
  • It is not help inside the live system. Tips that sit on top of the real application are the job of a digital adoption platform.
  • It is not a sales demo. Interactive demo tools such as Storylane and Navattic also build click-throughs, for showing a product to buyers. A training simulation adds hints, a score and a report to the LMS.
  • It follows one path. If a task has two very different routes, record each one.

How Recourse fits

Recourse is built around this one idea: a screen recording goes in, and Demo, Practice and Evaluate come out. The same recording can also become a course around the simulation, with the expert's explanation turned into lessons and questions.

It is free to try for 15 days. To try it on one recording without an account, use the free video to simulation tool.

Questions people ask

Can you turn a screen recording into an interactive simulation?
Yes. A tool that works from a recording splits the video into screens, finds where the expert clicked on each one, reads the buttons and labels, and writes an instruction for each step. The result is a copy of the screens that a learner clicks through. Recourse does this from a recording made with its built-in recorder or Chrome extension, or from a video you upload.
How do I make a screen recording interactive?
Upload it to a tool that builds a simulation from a recording, then review the steps it produces. Each click in the video becomes a step the learner has to do. Check the wording, add narration if you want it, and share the result by link or through your LMS.
Do I need to install anything to record?
Not in Recourse. Its built-in recorder runs in the browser: you choose a tab, a window or the whole screen to share. It records anything on your screen, desktop programs such as SAP GUI included. There is also a Chrome extension for web apps, which pinpoints each click on the page and lets you blur parts of it, and you can upload a video made with any other recorder.
Can I use a recording from Zoom, Teams or Loom?
Yes, if it shows the screen clearly. Upload the video file. Recordings of handover calls, testing sessions and vendor training are common sources. Trim or re-record if the video has long pauses or shows private data.
How long should the recording be?
Two to five minutes, covering one task. A learner should be able to finish the simulation in one sitting. If a process takes fifteen minutes, split it into three or four tasks and record each one.
Should I talk while I record?
Yes. Say what you are doing and why. The picture shows where to click. Your voice explains the rule behind the click, the common mistake and the exception. That is the part a learner cannot get from the screen alone.
Is an interactive simulation the same as an interactive video?
No. An interactive video is still a video, with questions or buttons added at certain moments. A simulation is a copy of the software's screens. The learner has to make every click and type every entry to move forward.

Keep reading

Last reviewed 19 November 2026. Recourse publishes these guides for learning, customer education and change teams. Details drawn from public sources can change.