SAP S/4HANA
Practice simulation training for SAP S/4HANA users
Record a transaction once in your own S/4HANA system. Every user gets a walkthrough, a hands-on practice run with hints, and a scored check that says whether they can do it unaided. No sandbox to provision, no classroom to schedule.
The short answer
A practice simulation for S/4HANA is a replica of your own Fiori screens and transactions that users click through themselves, before go-live, without touching the live system or a sandbox client. You record the task once, in your configuration, with your field names and your required entries. Recourse turns that recording into three things: a guided demo, a practice run with hints, and a scored evaluation that reports to your LMS.
The reason it matters on an S/4HANA programme is timing. Users are trained in the weeks before cutover, when the system is in flux and a training client is either unavailable or full of the wrong data. A simulation is available the moment you have a recording, and it can be re-captured when the screen changes during UAT.
The three failures an S/4HANA training plan usually hits
Classroom does not scale to the plant floor
A conversion touches finance, procurement, warehouse and plant maintenance at once. Classroom training schedules well for forty superusers and badly for two thousand end users across shifts and sites, and whatever was taught in week one has been reconfigured by week six.
The training client is not ready when the training is
Access, roles, seeded master data and someone to reset it after each cohort. By the time the sandbox is usable, the window before cutover has closed. A simulation needs none of that: it is a replica, not a client.
Nobody knows who is actually ready
Course completions in the LMS tell you people opened something. They do not tell you that the warehouse team can post a goods receipt unaided. That gap shows up as a help desk spike in week one after go-live.
What this looks like on a real transaction
Take creating a purchase order. A superuser clicks through it once in your S/4HANA system while the Recourse Chrome extension captures the screens and the clicks, and reads the page's HTML so it knows which button or field each click landed on. Roughly ten minutes later there is a course with three modes in it.
- Demo. The task performed end to end, narrated, with your field names on screen. For the person who has never seen the Fiori launchpad.
- Practice. The learner does it. Hints escalate if they stall: what to look for, then where, then the answer. Mistakes cost nothing because nothing is posted.
- Evaluate. Hints off, pass mark on. The result is a score per person, per task, and that is the number you take to the go-live readiness meeting.
When the screen changes during UAT, and it will, you re-capture that step rather than re-recording the whole transaction. On the Pro plan the package in your LMS is live SCORM, so the correction reaches every copy without a re-upload.
Where it fits in an ADKAR or Kirkpatrick plan
Change leads already have a framework and do not need a new one. The three modes map onto it directly.
| Mode | Prosci ADKAR | Kirkpatrick | What you can show a steering committee |
|---|---|---|---|
| Demo | Knowledge | Level 1 | Coverage: who has seen the new process |
| Practice | Ability, building | Level 2, partial | Where people struggle, by step, before cutover |
| Evaluate | Ability, evidenced | Level 2, and Level 3 when re-run after go-live | Readiness by role and by task, with a pass mark |
Recourse reports Evaluate scores to your LMS over SCORM 1.2, so the readiness number lives where the rest of your training data lives.
How this compares with the usual options
| Approach | Users can practise | Scored readiness | Effort to keep current | Typical cost |
|---|---|---|---|---|
| Recourse | Yes, with hints | Yes, pass mark to the LMS | Re-capture the changed step | Free 15 days, then $99 or $299 a month |
| Classroom and floor-walkers | Yes, while someone is watching | Trainer's judgement | Re-run the session | Trainer days plus travel |
| Recorded webinars and job aids | No | No | Re-record | Low, and low value |
| Sandbox client access | Yes | No, unless someone watches | Refresh and reseed | Basis time and licences |
| Storyline or Captivate simulations | Yes | Yes, Test or Assessment mode | Re-record in the vendor's recorder and republish | $33.90 a month to $1,749 per seat per year |
| ClickLearn | Limited, no try or test mode published | Not shown | Automated re-record claimed | $6,350 to $27,350 a year |
Beyond S/4HANA
The same approach works on any system whose screens you can record: Oracle Fusion, NetSuite, Dynamics 365 Finance and Operations, Business Central, Infor, Epicor Kinetic, Acumatica, Global Shop, and software your own team built. Desktop clients such as SAP GUI are supported through video upload rather than the Chrome extension.
Questions people ask
How do you practise SAP S/4HANA workflows before go-live?
Record the workflow once in your own system, while it is configured the way it will go live, and turn that recording into a simulation your users click through. They rehearse the real sequence with your field names, without a training client and without posting anything. When the configuration changes during UAT, re-capture the affected step rather than rebuilding the course.
What is the best way to train employees on new ERP software?
Show, rehearse, then test, on the tasks each role actually performs. Showing alone is the common failure: people watch a demo, understand it, and still cannot find the field a month later. The sequence that works is a short demo of the task, a hands-on practice run with hints, and a scored attempt without hints that tells you who is ready. Keep it per task and per role rather than one long course about the system.
Is simulation training better than classroom training for ERP?
They do different jobs. Classroom is good for the why: the process change, the new approval chain, the questions nobody writes down. It scales badly and it ages badly. Simulation is good for the how, scales to every shift and site at once, and can be corrected in minutes when a screen changes. Most programmes that work use classroom for superusers and simulations for everyone else.
Does this reduce ERP user errors after go-live?
It targets the most common cause of them, which is that a user is performing the task for the first time in production. Moving the first attempts into a simulation, and running a scored check before cutover, means you know which roles and which steps are still weak while there is still time to do something about it. It does not fix errors caused by bad master data or an unclear process, and no training tool does.
Can we deploy ERP practice simulations through our LMS?
Yes. Export SCORM 1.2 and upload it to SuccessFactors, Workday Learning, Cornerstone, Docebo, Moodle or whatever you run. Completions and Evaluate scores report back as normal. On the Pro plan the package stays connected to Recourse, so corrections during UAT reach every copy without a re-upload.
Which ERP simulation software vendors should an enterprise look at?
The practical shortlist is Recourse, Assima, ClickLearn, iorad, and Articulate Storyline or Adobe Captivate if you already own seats. They split by input. Assima clones the interface, ClickLearn and iorad capture while you click in the app, Storyline and Captivate use their own recorders, and Recourse takes either a Chrome capture or any recording you already have. Price ranges from $99 a month to quoted enterprise agreements.
Do we need a sandbox or training client?
No. The simulation is a replica built from the recording, so there is no system behind it to provision, seed or reset. That is usually the difference between training starting six weeks before cutover and training starting two weeks before it. If you do have a training client, record in it.
What happens when the system changes after go-live?
Re-capture the steps that changed. Cloud S/4HANA takes vendor releases on a regular cadence and most programmes also keep configuring for months after cutover, so this is the normal case rather than the exception. With live SCORM on the Pro plan the updated steps reach every LMS copy without anyone re-uploading a package.
How long does it take to build one?
A one-hour recording becomes a course in about ten minutes of processing. Your review is the real cost, and it should be: every step is editable and nothing ships without a person checking it. A superuser who can record a transaction can build the training for it the same afternoon.
Can SAP GUI and other desktop screens be used?
Yes. For browser-based Fiori apps the Chrome extension is the better input: it reads the page's HTML, so it knows which button or field each click landed on, and it lets you blur anything on the page that should stay private. For SAP GUI, Citrix-published windows or any thick client, record the screen with the built-in recorder or upload a video. More on desktop capture.
Record one transaction. Train every user on it.
Upload a recording of your own S/4HANA system and get a demo, a practice run and a scored check. Free for 15 days, no card.
- Practice simulations with hints
- Scored evaluation simulations
- Desktop and legacy applications
- ERP training
Written 3 November 2026. Competitor facts were checked against each vendor's own pages on 29 October 2026. Corrections: hello@recoursehq.com
- erp simulation training vs classroom training
- erp simulation software vendor for enterprise
- reducing erp user errors after go live
- lms deployment of erp practice simulations
- what is the best way to train employees on new erp software
- how to practice sap s4hana workflows before go live
- sap s4hana end user training
- fiori app training simulation
- go live readiness erp training
- sap training without a sandbox